2920-00-753-0816 STARTER,ENGINE,ELECTRICAL Index 2920-00-753-0819 STARTER,ENGINE,ELECTRICAL

National Stock Number:
2920-00-753-0817

Federal Supply Class:
2920

National Item Identification Number:
007530817

Description:
GENERATOR,ENGINE ACCESSORY

Detail:
A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of GENERATING SETS. For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.


Manufacturer Information:
110512116764GENERAL MOTORS CORP DELCO REMY DIV
110512124617GENERAL MOTORS CORP
110512161928GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT
306360R9192679NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/


Techincal Specification:
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET7.127 INCHES NOMINAL
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET8.249 INCHES NOMINAL
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER3.500 INCHES NOMINAL
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER3.500 INCHES NOMINAL
DISTANCE FROM END TO KEYWAY CENTER0.900 INCHES NOMINAL
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG0.0
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG180.0
BOTTOM MOUNTING HOLE DIAMETER0.379 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
GROUNDING METHODEXTERNAL
KEYWAY WIDTH0.125 INCHES NOMINAL
KEYWAY LENGTH0.625 INCHES NOMINAL
MAXIMUM OUTPUT CURRENT RATING IN AMPS17.0
MAXIMUM RATED ARMATURE SPEED IN RPM1450
MOUNTING HOLE THREAD CLASS2B
MOUNTING HOLE THREAD DIRECTIONRIGHT-HAND
MOUNTING HOLE THREAD DIAMETER0.375 INCHES NOMINAL
MOUNTING HOLE THREAD QUANTITY PER INCH16
MOUNTING HOLE THREAD SERIES DESIGNATORUNC
MOUNTING STYLEBRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED
SECOND STEP DIAMETER0.668 INCHES MINIMUM AND 0.669 INCHES MAXIMUM
SHAFT DRIVE END STYLESTRAIGHT SHAFT END, THREADED, W/KEYWAY
SHAFT ROTATION DIRECTIONCLOCKWISE
RECTIFIER LOCATIONSEPARATE
THREAD CLASS2A
THREAD DIAMETER0.379 INCHES MINIMUM AND 0.387 INCHES MAXIMUM
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.500 INCHES NOMINAL
THREAD QUANTITY PER INCH20
THREAD SERIESUNS
UNTHREADED PORTION LENGTH0.800 INCHES NOMINAL
VOLTAGE IN VOLTS12.0
SUBMERSIBILITYNONSUBMERSIBLE


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us