| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.328 INCHES NOMINAL |
| DISTANCE FROM END TO KEYWAY CENTER | 0.344 INCHES NOMINAL |
| BOTTOM MOUNTING HOLE DIAMETER | 1.000 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 4.188 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TOP MOUNTING SLOT AND BOTTOM MOUNTING HOLE | 8.376 INCHES NOMINAL |
| GROUND POLARITY TYPE | NEGATIVE |
| KEYWAY LENGTH | 0.312 INCHES NOMINAL |
| KEYWAY WIDTH | 0.156 INCHES NOMINAL |
| III MAXIMUM OUTPUT CURRENT RATING IN AMPS | 40.0 |
| PILOT DIAMETER | 2.375 INCHES NOMINAL |
| PILOT HEIGHT | 0.812 INCHES NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 12000 |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIAMETER | 0.190 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 24 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF |
| MOUNTING STYLE | FLANGE MTD W/THREE MTG HOLES |
| RECTIFIER LOCATION | INTEGRAL |
| SECOND STEP DIAMETER | 0.669 INCHES NOMINAL |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| VOLTAGE IN VOLTS | 7.0 |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| THREAD CLASS | 2A |
| THREAD DIAMETER | 0.500 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.344 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 20 |
| THREAD SERIES | UNF |
| TOP MOUNTING HOLE DIAMETER | 1.000 INCHES NOMINAL |
| UNTHREADED PORTION LENGTH | 0.844 INCHES NOMINAL |