| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 120.0 |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 240.0 |
| BOTTOM MOUNTING HOLE DIAMETER | 0.448 INCHES MINIMUM AND 0.458 INCHES MAXIMUM |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 6.940 INCHES NOMINAL |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.840 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 4.745 INCHES MINIMUM AND 4.755 INCHES MAXIMUM |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 4.745 INCHES MINIMUM AND 4.755 INCHES MAXIMUM |
| DISTANCE FROM END TO KEYWAY CENTER | 0.625 INCHES NOMINAL |
| FURNISHED ITEMS | CAPACITOR AND COOLING FAN |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| INPUT CURRENT RATING | 500.0 AMPERES MAXIMUM |
| KEYWAY LENGTH | 1.250 INCHES NOMINAL |
| KEYWAY WIDTH | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| LARGEST DIAMETER | 0.9990 INCHES MINIMUM AND 0.9995 INCHES MAXIMUM |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 300.0 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| MOUNTING HOLE THREAD DIAMETER | 0.438 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 20 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF |
| MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | STARTER-GENERATOR,ENGINE |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END W/KEYWAY |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| UNTHREADED PORTION LENGTH | 1.860 INCHES NOMINAL |
| VOLTAGE IN VOLTS | 30.0 |