| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1900 |
| BOTTOM MOUNTING HOLE DIAMETER | 0.379 INCHES MINIMUM AND 0.387 INCHES MAXIMUM |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.118 INCHES MINIMUM AND 7.136 INCHES MAXIMUM |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 7.998 INCHES MINIMUM AND 8.016 INCHES MAXIMUM |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.865 INCHES MINIMUM AND 3.885 INCHES MAXIMUM |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.500 INCHES NOMINAL |
| DISTANCE FROM END TO KEYWAY CENTER | 0.900 INCHES NOMINAL |
| FURNISHED ITEMS | WOODRUFF KEY |
| FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| KEYWAY WIDTH | 0.125 INCHES NOMINAL |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 18.0 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| MOUNTING HOLE THREAD DIAMETER | 0.312 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| SECOND STEP DIAMETER | 0.6684 INCHES MINIMUM AND 0.669 INCHES MAXIMUM |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| THREAD DIAMETER | 0.669 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.460 INCHES MINIMUM AND 0.550 INCHES MAXIMUM |
| THREAD PITCH DIAMETERS | +0.6324 TO 0.6365 INCHES |
| THREAD SERIES | UNS |
| THREAD QUANTITY PER INCH | 20 |
| UNTHREADED PORTION LENGTH | 0.750 INCHES MINIMUM AND 0.840 INCHES MAXIMUM |
| VOLTAGE IN VOLTS | 24.0 |