2920-01-149-8606, GENERATOR,ENGINE ACCESSORY

4410-01-149-8608 VALVE,REGULATING,FEED WATER

National Stock Number:
2920-01-149-8606

Federal Supply Class:
2920

National Item Identification Number:
011498606

Description:
GENERATOR,ENGINE ACCESSORY

Detail:
A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of GENERATING SETS. For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.

Manufacturer Information:

1105345	077S2	DELCO REMY AMERICA INC
1105345	11862	GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT
1105500	077S2	DELCO REMY AMERICA INC
1105500	11862	GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT
1105500	16764	GENERAL MOTORS CORP DELCO REMY DIV
1105345	16764	GENERAL MOTORS CORP DELCO REMY DIV
GM-500	64060	MACHINERY COMPONENTS INC
GM-500-12A00	64060	MACHINERY COMPONENTS INC
1105500OG	66022	OHIO GENERATOR REMANUFACTURING
1105500	7X677	GENERAL MOTORS LLC
2920011498606	A00AM	E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
2920011498606	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE

Techincal Specification:

ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG	0.0
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG	180.0
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT	100
BOTTOM MOUNTING HOLE DIAMETER	10.5 MILLIMETERS NOMINAL
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET	66.8 MILLIMETERS NOMINAL
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET	107.7 MILLIMETERS NOMINAL
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER	101.6 MILLIMETERS NOMINAL
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER	101.6 MILLIMETERS NOMINAL
GROUND POLARITY TYPE	POSITIVE
GROUNDING METHOD	INTERNAL
MOUNTING HOLE THREAD DIAMETER	25.4 MILLIMETERS NOMINAL
MOUNTING HOLE THREAD SERIES DESIGNATOR	SI
MOUNTING STYLE	BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED
RECTIFIER LOCATION	INTEGRAL
SHAFT DRIVE END STYLE	STRAIGHT SHAFT END, THREADED
SHAFT ROTATION DIRECTION	CLOCKWISE
THREAD LENGTH	25.5 MILLIMETERS NOMINAL
UNTHREADED PORTION LENGTH	25.4 MILLIMETERS NOMINAL
VOLTAGE IN VOLTS	12.0

Click here to Register for Free 30-day Trial