| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 10.0 |
| BOTTOM MOUNTING HOLE DIAMETER | 0.440 INCHES MINIMUM AND 0.462 INCHES MAXIMUM |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.281 INCHES MINIMUM AND 7.332 INCHES MAXIMUM |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.530 INCHES MINIMUM AND 8.626 INCHES MAXIMUM |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 5.200 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 5.200 INCHES NOMINAL |
| DISTANCE FROM END TO KEYWAY CENTER | 1.353 INCHES MINIMUM AND 1.389 INCHES MAXIMUM |
| KEYWAY LENGTH | 1.000 INCHES MINIMUM AND 1.020 INCHES MAXIMUM |
| KEYWAY WIDTH | 0.166 INCHES NOMINAL |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| SECOND STEP DIAMETER | 0.780 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| THREAD CLASS | 2A |
| THREAD DIAMETER | 0.750 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.730 INCHES MINIMUM AND 0.754 INCHES MAXIMUM |
| THREAD SERIES | UNF |
| THREAD QUANTITY PER INCH | 16 |
| UNTHREADED PORTION LENGTH | 1.246 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
| VOLTAGE IN VOLTS | 28.0 |