|
|
|
National Stock Number:
2940-00-730-6284
Federal Supply Class:
2940
National Item Identification Number:
007306284
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 810551 | 16058 | TELECTRO-MEK INC | | 810551-1 | 16058 | TELECTRO-MEK INC |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | BODY DIAMETER | 1.594 INCHES MINIMUM AND | | 1.656 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.885 INCHES MINIMUM AND | | 0.906 INCHES MAXIMUM | | BODY OVERALL LENGTH | 3.499 INCHES NOMINAL | | MATERIAL | PAPER FILTERING MEDIUM | | METAL FRAME | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | NONREUSABLE | | FILTRATION RATING IN MICRONS | 10.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND | | 160.0 DEG FAHRENHEIT MAXIMUM | | DROP PRESSURE | 10.0 POUNDS PER SQUARE INCH | | DIFFERENTIAL PRESSURE | 150.0 POUNDS PER SQUARE INCH | | FEATURES PROVIDED | BY-PASS VALVE | | TEST DATA DOCUMENT | 14450-MILF55048 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | FSC APPLICATION DATA | LUBRICATING UNIT,HAND OPERATED |
|
|