|
|
|
National Stock Number:
2940-00-817-5338
Federal Supply Class:
2940
National Item Identification Number:
008175338
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 119390 | 64104 | DRESSER, LLC | | 119390A | 64104 | DRESSER, LLC | | 1700 | 050Q3 | NATIONAL AUTOMOTIVE PARTS ASSN/NAPA/ | | 1700 | 0HYJ6 | GENUINE PARTS COMPANY | | 250046 | 55469 | ESSEX INDUSTRIES, INC. | | 1K5507 | 93343 | WHITE FARM EQUIPMENT CO SUB OF TIC INVESTMENT CORP | | 5A18967 | 13800 | PARKER-HANNIFIN CORPORATION | | 700 | 50284 | CHAMPION LABORATORIES, INC. | | 250139 | 55469 | ESSEX INDUSTRIES, INC. | | C166 | 73370 | HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV CONSUMER PRODUCTS GROUP | | 409 | 74069 | HASTINGS MANUFACTURING CO | | 51700 | 79396 | WIX CORP | | CW12700MP | 79396 | WIX CORP | | C-253 | 87405 | FACET (OKLAHOMA) LLC | | PT-304 | 12658 | BALDWIN FILTERS INC | | T305M | 12658 | BALDWIN FILTERS INC | | SA18967 | 13800 | PARKER-HANNIFIN CORPORATION | | SA18967W | 13800 | PARKER-HANNIFIN CORPORATION | | P415 | 24617 | GENERAL MOTORS CORP | | LFP700 | 37099 | LUBER-FINER INC SUB OF CHAMPION LABORATORIES INC AFFIL OF UIS INC | | X-169 | 56367 | PARMA INDUSTRIES INC | | X-170 | 56367 | PARMA INDUSTRIES INC | | PM-170 | 56367 | PARMA INDUSTRIES INC | | PMX 169 | 56367 | PARMA INDUSTRIES INC | | PMX-170 | 56367 | PARMA INDUSTRIES INC | | T43 | 64829 | ARVINMERITOR INC | | P415 | 70040 | GENERAL MOTORS CORP AC ROCHESTER DIV | | WD-92 | 72530 | DELUXE PRODUCTS DIV WALKER MFG CO | | P415 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | BODY DIAMETER | 3.750 INCHES MINIMUM AND 4.313 INCHES MAXIMUM | | BODY OVERALL LENGTH | 7.000 INCHES MINIMUM AND 7.625 INCHES MAXIMUM | | FILTERING MEDIA DESIGN | LOOSE PACKED SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | LUBRICATING OIL SYSTEM,ENGINE,NONAIRCRAFT | | MATERIAL | METAL CONTAINER/CARTRIDGE | | MATERIAL | PLASTIC FILTERING MEDIUM OR CELLULOSE FILTERING MEDIUM | | MATERIAL | RUBBER SYNTHETIC SEAL | | III STYLE DESIGNATOR | CYLINDRICAL W/INTEGRAL OUTER CASING | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | NOMINAL THREAD SIZE | 2.750 INCHES | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 1 CLASS | | SPECIAL FEATURES | FOR BY PASS DESIGNED FILTRATION SYSTEM | | TEST DATA DOCUMENT | 81348-FF351 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD SERIES DESIGNATOR | UNC |
|
|