|
|
|
National Stock Number:
2940-00-825-4394
Federal Supply Class:
2940
National Item Identification Number:
008254394
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 51083 | 79396 | WIX CORP | | FF351 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | P73 | 12658 | BALDWIN FILTERS INC | | LF568 | 15434 | CUMMINS INC. | | PF316 | 70040 | GENERAL MOTORS CORP AC ROCHESTER DIV | | PF316 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| BODY DIAMETER | 3.406 INCHES MINIMUM AND 3.500 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.750 INCHES NOMINAL | | BODY OVERALL LENGTH | 4.156 INCHES MINIMUM AND 4.250 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | PAPER FILTERING MEDIUM | | MATERIAL | METAL AND PAPER CONTAINER/CARTRIDGE | | MATERIAL | RUBBER SYNTHETIC SEAL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 1 CLASS | | SPECIAL FEATURES | DESIGNED FOR BYPASS FILTRATION SYSTEM | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | TEST DATA DOCUMENT | 81348-FF351 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|