|
|
|
National Stock Number:
2940-00-848-5386
Federal Supply Class:
2940
National Item Identification Number:
008485386
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 010582AB | 10988 | CNH INDUSTRIAL AMERICA LLC | | 1557972 | 86403 | CHRYSLER CORP SERVICE AND PARTS OPNS | | 1653 | 050Q3 | NATIONAL AUTOMOTIVE PARTS ASSN/NAPA/ | | 1653 | 0HYJ6 | GENUINE PARTS COMPANY | | 1653 | 24617 | GENERAL MOTORS CORP | | 51653 | 79396 | WIX CORP | | 54755 | 64829 | ARVINMERITOR INC | | A30834 | 10988 | CNH INDUSTRIAL AMERICA LLC | | AE-33538-A | 23040 | FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES | | AE-33538-A | 57526 | FORD MOTOR COMPANY | | C1653PL | 73370 | HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV CONSUMER PRODUCTS GROUP | | C1653PL | 87405 | FACET (OKLAHOMA) LLC | | LP1653 | 37099 | LUBER-FINER INC SUB OF CHAMPION LABORATORIES INC AFFIL OF UIS INC | | LP1653 | 50284 | CHAMPION LABORATORIES, INC. | | P-183 | 12658 | BALDWIN FILTERS INC | | PF341 | 70040 | GENERAL MOTORS CORP AC ROCHESTER DIV | | PF341 | 7X677 | GENERAL MOTORS LLC | | PM-213 | 56367 | PARMA INDUSTRIES INC |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | BODY DIAMETER | 3.469 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.062 INCHES NOMINAL | | BODY OVERALL LENGTH | 1.562 INCHES NOMINAL | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | ANY ACCEPTABLE SEAL | | MATERIAL | CELLULOSE FILTERING MEDIUM | | MATERIAL | STEEL CONTAINER/CARTRIDGE | | III STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE |
|
|