|
|
|
National Stock Number:
2940-00-933-4433
Federal Supply Class:
2940
National Item Identification Number:
009334433
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 1736195-01 | 90005 | PUROLATOR FACET INC. | | 8356910 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | R9W1065-826 | 00736 | FALLS FILTRATION TECHNOLOGIES, INC. | | R9W1065-826 | 4V692 | A W C | | M3826 | 92863 | MARVEL ENGINEERING COMPANY INC | | C7853 | 94330 | JSN INC | | S8356910 | 3U011 | SWIFT FILTERS, INC. | | R9W1065-826 | R1120 | SATAIR A/S |
|
Techincal Specification:
| BODY INSIDE DIAMETER | 0.900 INCHES MINIMUM AND 1.100 INCHES MAXIMUM | | BODY OVERALL LENGTH | 13.160 INCHES MINIMUM AND 13.590 INCHES MAXIMUM | | OVERALL WIDTH | 2.960 INCHES MINIMUM AND 3.010 INCHES MAXIMUM | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | TEMP RATING | 300.0 FAHRENHEIT NOMINAL |
|
|