|
|
|
National Stock Number:
2940-01-152-5584
Federal Supply Class:
2940
National Item Identification Number:
011525584
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 281824 | 06853 | BENDIX COMMERCIAL VEHICLE SYSTEMS LLC | | 6D9677 | 11083 | CATERPILLAR INC | | 6D9677 | ZA045 | WILLIAM ADAMS PTY LTD | | 6D9677 | ZF912 | HASTINGS DEERING (AUST) PTY LTD | | 6D9677 | ZY243 | WESTRAC PTY LTD |
|
Techincal Specification:
| DESIGN TYPE | LIMITED | | BODY DIAMETER | 1.000 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.120 INCHES NOMINAL | | BODY THICKNESS | 0.500 INCHES NOMINAL | | FILTERING MEDIA DESIGN | POROUS SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | INSIDE OUT OR OUTSIDE IN | | MATERIAL | PLASTIC URETHANE BODY | | III STYLE DESIGNATOR | ROUND (BASICALLY FLAT W/ OPENING) | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE |
|
|