|
|
|
National Stock Number:
2945-00-585-1161
Federal Supply Class:
2945
National Item Identification Number:
005851161
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 051820 | 90005 | PUROLATOR FACET INC. | | 62814 | 64829 | ARVINMERITOR INC | | AC1914E6 | 18350 | PALL AEROPOWER CORPORATION | | 634211-3 | 98897 | LOCKHEED MARTIN CORP | | AC1914E6 | C0202 | PALL GMBH |
|
Techincal Specification:
| BODY DIAMETER | 0.730 INCHES MINIMUM AND 0.757 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.376 INCHES MINIMUM AND 0.378 INCHES MAXIMUM | | BODY OVERALL LENGTH | 1.750 INCHES MINIMUM AND 1.800 INCHES MAXIMUM | | DESIGN TYPE | REUSABLE | | DIFFERENTIAL PRESSURE | 2000.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 10.0 ABSOLUTE AND 25.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | PUMP INSTALLATION,HAND,OIL TANK,ENGINE,AIRCRAFT | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | STYLE DESIGNATOR | CYLINDRICAL W/CLOSED ENDS | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 275.0 FAHRENHEIT MAXIMUM |
|
|