|
|
|
National Stock Number:
2945-00-859-2921
Federal Supply Class:
2945
National Item Identification Number:
008592921
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| AC2466E5 | 18350 | PALL AEROPOWER CORPORATION | | AC2466E5 | C0202 | PALL GMBH | | QA03362 | F6951 | PALL FRANCE SA DIVISION PALLAEROSPACE | | QA03362 | U0088 | PALL AEROSPACE A DIVISION OF PALL EUROPE LTD |
|
Techincal Specification:
| DESIGN TYPE | REUSABLE | | DIFFERENTIAL PRESSURE | 45.0 POUNDS PER SQUARE INCH | | DROP PRESSURE | 20.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 10.0 ABSOLUTE AND 5.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | FILTER,FLUID,PRESSURE,ENGINE OIL,AIRCRAFT | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 275.0 FAHRENHEIT MAXIMUM |
|
|