| BAFFLE QUANTITY | 3 |
| BODY SHAPE | ROUND |
| COOLANT TYPE | AIR |
| DESIGN TYPE | DRY |
| INLET PROJECTION LENGTH | 5.500 INCHES NOMINAL SINGLE INLET5.500 INCHES NOMINAL |
| INLET CONNECTION TYPE | UNTHREADED SINGLE INLET |
| INLET INSIDE DIAMETER | 2.405 INCHES MINIMUM AND 2.425 INCHES MAXIMUM SINGLE INLET |
| INLET LOCATION | LOCATED PERPENDICULAR THROUGH SIDES OF BODY,2.750 IN. FROM CENTER OF INLET TO END OF BODY SINGLE INLET |
| INLET OUTSIDE DIAMETER | 2.465 INCHES MINIMUM AND 2.485 INCHES MAXIMUM SINGLE INLET |
| OUTLET PROJECTION LENGTH | 3.375 INCHES NOMINAL 1ST OUTLET3.375 INCHES NOMINAL |
| OUTLET THREAD DIRECTION | RIGHT-HAND 1ST OUTLET |
| OUTLET THREAD LOCATION | EXTERNAL 1ST OUTLET |
| OUTLET THREAD SERIES DESIGNATOR | NPT 1ST OUTLET |
| OUTLET THREAD SIZE | 2-11-1/2 1ST OUTLET |
| OUTLET CONNECTION TYPE | THREADED 1ST OUTLET |
| OUTLET LOCATION | CENTRALLY LOCATED IN END SECTION OF BODY 1ST OUTLET |
| OVERALL DIAMETER | 7.000 INCHES NOMINAL |
| OVERALL LENGTH | 24.000 INCHES NOMINAL |
| MATERIAL | STEEL LOCATION NOT OTHERWISE SPECIFIED |
| MUFFLER DESIGN | BAFFLE |
| OPERATING POSITION | HORIZONTAL |
| SPECIAL FEATURES | RAIN CAP WELDED TO INLET PIPE,INLET PIPE EQUIPPED W/CLAMP,BRACKET WELDED TO AND PROTRUDING THROUGH BOTTON OF MUFFLER W/SECURING HOLES LOCATED 15.000 IN. FROM CENTER OF INLET TO CENTER OF HOLES |
| SURFACE TREATMENT | ALUMINUM |
| TUBE QUANTITY | 2 |