| BAFFLE QUANTITY | 2 |
| BODY SHAPE | ROUND |
| COOLANT TYPE | AIR |
| DESIGN TYPE | DRY |
| FSC APPLICATION DATA | 1. DIESEL ENGINE,GENERATOR SET |
| INLET LOCATION | CENTRALLY LOCATED INSIDE 4-1/4 IN. PORM 1/16 FROM END SINGLE INLET |
| INLET CONNECTION TYPE | FLANGE SINGLE INLET |
| INLET FLANGE MOUNTING HOLE DIAMETER | 0.563 INCHES NOMINAL SINGLE INLET0.563 INCHES NOMINAL |
| INLET FLANGE MOUNTING PROVISION AND QUANTITY | 4 HOLES SINGLE INLET4 HOLES |
| INLET FLANGE MOUNTING PROVISION SPACING | 4-1/4 IN. C TO C DIM. OF STUDS SINGLE INLET |
| INLET FLANGE SHAPE | SQUARE SINGLE INLET |
| OUTLET CONNECTION TYPE | UNTHREADED 1ST OUTLET |
| OUTLET PROJECTION LENGTH | 2.344 INCHES NOMINAL 1ST OUTLET2.344 INCHES NOMINAL |
| OUTLET INSIDE DIAMETER | 3.005 INCHES MINIMUM AND 3.025 INCHES MAXIMUM 1ST OUTLET |
| OUTLET INTEGRAL TAIL PIPE LENGTH | 19.313 INCHES MINIMUM AND 19.438 INCHES MAXIMUM 1ST OUTLET |
| OUTLET LOCATION | CENTRALLY LOCATED IN END SECTION OF BODY 1ST OUTLET |
| OUTLET OUTSIDE DIAMETER | 3.128 INCHES MINIMUM AND 3.148 INCHES MAXIMUM 1ST OUTLET |
| OVERALL DIAMETER | 7.000 INCHES NOMINAL |
| OVERALL LENGTH | 25.375 INCHES MINIMUM AND 25.625 INCHES MAXIMUM |
| MATERIAL | STEEL LOCATION NOT OTHERWISE SPECIFIED |
| MUFFLER DESIGN | BAFFLE |
| OPERATING POSITION | HORIZONTAL |
| TUBE QUANTITY | 2 |