| MATERIAL | STEEL COMP 430 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766, CLASS 7, COND A FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | ALUMINUM |
| DESIGN TYPE | DRY |
| COOLANT TYPE | AIR |
| MUFFLER DESIGN | BAFFLE |
| BAFFLE QUANTITY | 1 |
| TUBE QUANTITY | 1 |
| BODY SHAPE | OVAL |
| OVERALL LENGTH | 28.344 INCHES MINIMUM AND |
| 28.406 INCHES MAXIMUM |
| OVERALL WIDTH | 11.375 INCHES NOMINAL |
| OVERALL HEIGHT | 8.000 INCHES NOMINAL |
| OPERATING POSITION | HORIZONTAL |
| INLET CONNECTION TYPE | FLANGE SINGLE INLET |
| FLANGE 1ST OUTLET |
| INLET LOCATION | LOCATED ON SIDE,CENTER OF OPENINGS APPROX 1-7/8 IN. ABOVE HORIZONTAL CENTER LINE |
| INLET FLANGE SHAPE | RECTANGLE SINGLE INLET |
| RECTANGLE 1ST OUTLET |
| INLET FLANGE MOUNTING PROVISION AND QUANTITY | 8 HOLES SINGLE INLET |
| 8 HOLES 1ST OUTLET |
| INLET FLANGE MOUNTING HOLE DIAMETER | 0.312 INCHES NOMINAL SINGLE INLET |
| 0.312 INCHES NOMINAL 1ST OUTLET |
| OUTLET CONNECTION TYPE | UNTHREADED SINGLE INLET |
| UNTHREADED 1ST OUTLET |
| OUTLET LOCATION | LOCATED ON BOTTOM 4-9/16 IN. FROM END OF BODY TO CENTER OF OPENING,LOCATED ON BOTTOM,23-3/16 IN. FROM END OF BODY TO CENTER OF OPENING |
| OUTLET PROJECTION LENGTH | 0.250 INCHES NOMINAL SINGLE INLET |
| 0.250 INCHES NOMINAL 1ST OUTLET |
| OUTLET OUTSIDE DIAMETER | 3.000 INCHES NOMINAL |
| OUTLET INSIDE DIAMETER | 6.438 INCHES NOMINAL SINGLE INLET |
| 6.438 INCHES NOMINAL 1ST OUTLET |
| SPECIAL FEATURES | EACH INLET CONNECTION HAS THREE 2.812 IN. ID HOLES |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 19207 |
| DESIGN CONTROL REFERENCE | 7364463 |