| OVERALL LENGTH | 7.400 INCHES |
| OVERALL WIDTH | 5.560 INCHES |
| OVERALL HEIGHT | 8.410 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.970 INCHES SINGLE END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 2.250 INCHES SINGLE END |
| MOUNTING METHOD | FLANGE |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 3.536 INCHES |
| MOUNTING FACILITY CIRCLE DIAMETER | 5.000 INCHES |
| INCLOSURE FEATURE | WATERTIGHT |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | AC INPUT |
| FREQUENCY IN HERTZ | 400.0 INPUT |
| PHASE | THREE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 208.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 0.3000 HORSEPOWER OUTPUT |
| WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | -51.0 OPERATING DEG CELSIUS AND |
| 51.7 OPERATING DEG CELSIUS |
| COOLING METHOD | NONVENTILATED |
| MAXIMUM OPERATING ALTITUDE RATING | 10000.0 FEET |
| TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 1020.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET BELOW PARALLEL TO SHAFT AXIS SINGLE END |
| SHAFT END CHARACTERISTIC | A14 SINGLE STYLE SINGLE END |
| SPLINE MINOR DIAMETER | 0.5625 INCHES NOMINAL SINGLE END |
| SHAFT DIAMETER | 0.6560 INCHES NOMINAL SINGLE END |
| SPLINE LENGTH | 0.8800 INCHES NOMINAL SINGLE END |
| SPLINE QUANTITY | 20 SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |