| OVERALL LENGTH | 2.812 INCHES |
| OVERALL WIDTH | 2.750 INCHES |
| OVERALL HEIGHT | 5.250 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 1.000 INCHES SINGLE END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 2.719 INCHES SINGLE END |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.562 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.562 INCHES |
| INCLOSURE FEATURE | OPEN |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | AC INPUT |
| FREQUENCY IN HERTZ | 50.0 OR |
| 60.0 INPUT |
| PHASE | SINGLE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 6.0 LINE TO NEUTRAL LOW OR |
| 240.0 LINE TO NEUTRAL HIGH INPUT |
| TORQUE RATING AND TYPE | 15.0 INCH-POUNDS STALLED |
| WINDING TYPE | INDUCTION-SHADED POLE |
| DUTY CYCLE | CONTINUOUS |
| COOLING METHOD | FAN COOLED |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 40.000 LOW REVOLUTIONS PER MINUTE AND |
| 80.000 HIGH REVOLUTIONS PER MINUTE FIRST END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.2500 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND |
| VERTICAL MOUNTING POSITION |