| OVERALL LENGTH | 7.500 INCHES |
| OVERALL WIDTH | 6.090 INCHES |
| OVERALL HEIGHT | 4.830 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 1.590 INCHES SINGLE END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 1.550 INCHES SINGLE END |
| MOUNTING METHOD | FACE |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.609 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 3.500 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | AC INPUT |
| CURRENT RATING IN AMPS | 0.140 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | THREE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 230.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 0.0200 HORSEPOWER OUTPUT |
| TORQUE RATING AND TYPE | 40.0 INCH-POUNDS RUNNING |
| WINDING TYPE | INDUCTION-SINGLE VALUE CAPACITOR SPLIT PHASE |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | 40.0 AMBIENT DEG CELSIUS |
| COOLING METHOD | NONVENTILATED |
| TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
| SPEED CONTROL METHOD AND DEVICE TYPE | ELECTRICAL MECHANICAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 7.200 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | ANGLED TO ARMATURE/ROTOR AXIS SINGLE END |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.499 INCHES MINIMUM AND |
| 0.500 INCHES MAXIMUM SINGLE END |
| FLATTED PORTION LENGTH | 1.3800 INCHES NOMINAL SINGLE END |
| FLAT DEPTH | 0.0200 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |