| OVERALL LENGTH | 1.906 INCHES |
| OVERALL WIDTH | 2.125 INCHES |
| OVERALL HEIGHT | 2.438 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.258 INCHES SINGLE END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 1.971 INCHES SINGLE END |
| MOUNTING METHOD | FIXED BASE |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.062 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.875 INCHES |
| MOUNTING FACILITY CIRCLE DIAMETER | 1.875 INCHES |
| INCLOSURE FEATURE | DRIPTIGHT |
| INCLOSURE SPECIFICATION | NEMA |
| CURRENT TYPE | AC INPUT |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | SINGLE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 10.0 INCH-OUNCES RUNNING |
| WINDING TYPE | SYNCHRONOUS SHADED POLE |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | 0.0 OPERATING DEG CELSIUS AND |
| 65.0 OPERATING DEG CELSIUS AND |
| 45.0 AMBIENT DEG CELSIUS |
| COOLING METHOD | AMBIENT AIR |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| SPEED CONTROL METHOD AND DEVICE TYPE | ELECTRICAL REMOTE |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 5.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| SHAFT END CHARACTERISTIC | A8 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL SINGLE END |
| SLOT WIDTH | 0.031 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |