| OVERALL LENGTH | 4.419 INCHES |
| OVERALL WIDTH | 1.250 INCHES |
| OVERALL HEIGHT | 1.250 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.500 INCHES SINGLE END |
| MOUNTING METHOD | PAD |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.000 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.000 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | DC INPUT |
| CURRENT RATING IN AMPS | 0.300 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 26.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 0.0050 HORSEPOWER OUTPUT |
| WINDING TYPE | PERMANENT MAGNET |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 3.0 SECONDS MAXIMUM ON AND |
| 6.0 SECONDS MINIMUM OFF |
| TEMP RATING | -54.0 OPERATING DEG CELSIUS AND |
| 71.0 OPERATING DEG CELSIUS |
| COOLING METHOD | NONVENTILATED |
| TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 12.000 LOW REVOLUTIONS PER MINUTE AND |
| 15.000 HIGH REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE SINGLE END |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.3130 INCHES NOMINAL SINGLE END |
| FLATTED PORTION LENGTH | 0.4687 INCHES NOMINAL SINGLE END |
| FLAT DEPTH | 0.0320 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |