| OVERALL LENGTH | 3.500 INCHES |
| OVERALL WIDTH | 1.312 INCHES |
| OVERALL HEIGHT | 1.187 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.593 INCHES SINGLE END |
| MOUNTING METHOD | FLANGE |
| MOUNTING FACILITY TYPE AND QUANTITY | 3 UNTHREADED HOLE |
| MOUNTING FACILITY CIRCLE DIAMETER | 1.125 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | DC INPUT |
| CURRENT RATING IN AMPS | 0.400 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 27.5 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 2.5 INCH-POUNDS RUNNING AND |
| 7.5 INCH-POUNDS STALLED AND |
| 8.125 INCH-POUNDS STARTING |
| WINDING TYPE | PERMANENT MAGNET |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 26.0 SECONDS MAXIMUM ON AND |
| 4.0 SECONDS MINIMUM OFF |
| TEMP RATING | -55.0 OPERATING DEG CELSIUS AND |
| 85.0 OPERATING DEG CELSIUS |
| COOLING METHOD | NONVENTILATED |
| MAXIMUM OPERATING ALTITUDE RATING | 50000.0 FEET |
| TERMINAL TYPE AND QUANTITY | 2 SOLDER LUG |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 70.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE SINGLE END |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| SHAFT END CHARACTERISTIC | A23 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.1874 INCHES NOMINAL SINGLE END |
| TEETH QUANTITY | 34 SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |