| OVERALL LENGTH | 3.938 INCHES |
| OVERALL WIDTH | 1.375 INCHES |
| OVERALL HEIGHT | 1.375 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.500 INCHES SINGLE END |
| MOUNTING METHOD | FLANGE |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.812 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.812 INCHES |
| MOUNTING FACILITY CIRCLE DIAMETER | 0.406 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | AC INPUT |
| CURRENT RATING IN AMPS | 0.100 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| FREQUENCY IN HERTZ | 400.0 INPUT |
| PHASE | THREE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 3.0 INCH-OUNCES RUNNING |
| WINDING TYPE | SYNCHRONOUS |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | -40.0 OPERATING DEG CELSIUS AND |
| 71.0 OPERATING DEG CELSIUS |
| COOLING METHOD | NONVENTILATED |
| MAXIMUM OPERATING ALTITUDE RATING | 10000.0 FEET |
| TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| SPEED CONTROL METHOD AND DEVICE TYPE | ELECTRICAL MECHANICAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 0.195 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE SINGLE END |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.749 INCHES MINIMUM AND |
| 0.759 INCHES MAXIMUM SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |
| SPECIAL FEATURES | STYLE3B AS DESCRIBED HAS SMALL SHOULDER AT FLANGED END NEXT TO OUTPUT SHAFT AND NO EXTENDED EAR |