| OVERALL LENGTH | 2.221 INCHES |
| OVERALL WIDTH | 2.125 INCHES |
| OVERALL HEIGHT | 2.437 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 3.393 INCHES SINGLE END |
| MOUNTING METHOD | FLANGE |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| MOUNTING FACILITY CIRCLE DIAMETER | 1.875 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | DC INPUT |
| CURRENT RATING IN AMPS | 0.065 SINGLE OUTPUT |
| CURRENT RATING METHOD | NO LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 26.0 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 2.0 INCH-OUNCES RUNNING |
| WINDING TYPE | PERMANENT MAGNET |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 5.0 SECONDS MAXIMUM ON AND |
| 10.0 SECONDS MINIMUM OFF |
| TEMP RATING | -20.0 OPERATING DEG CELSIUS AND |
| 80.0 OPERATING DEG CELSIUS |
| COOLING METHOD | AMBIENT AIR |
| MAXIMUM OPERATING ALTITUDE RATING | 10000.0 FEET |
| TERMINAL TYPE AND QUANTITY | 2 PLUG |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 0.670 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.1250 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| ELECTRIC NOISE SUPPRESSOR AND |
| HORIZONTAL MOUNTING POSITION |