| OVERALL LENGTH | 3.375 INCHES |
| OVERALL WIDTH | 3.687 INCHES |
| OVERALL HEIGHT | 2.875 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.532 INCHES SINGLE END |
| MOUNTING METHOD | FLANGE |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| MOUNTING FACILITY CIRCLE DIAMETER | 3.312 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | AC INPUT |
| CURRENT RATING IN AMPS | 0.090 SINGLE OUTPUT |
| CURRENT RATING METHOD | NO LOAD |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | SINGLE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 120.0 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 4.25 INCH-OUNCES STALLED |
| WINDING TYPE | INDUCTION-SPLIT PHASE |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | -17.8 OPERATING DEG CELSIUS AND |
| 65.6 OPERATING DEG CELSIUS AND |
| 21.1 AMBIENT DEG CELSIUS |
| COOLING METHOD | AIR TO AIR COOLED |
| TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
| SPEED CONTROL METHOD AND DEVICE TYPE | ELECTRICAL HANDWHEEL |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 54.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET RIGHT PARALLEL TO SHAFT AXIS SINGLE END |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.204 INCHES MINIMUM AND |
| 0.205 INCHES MAXIMUM SINGLE END |
| SPLINE LENGTH | 0.9530 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |