| OVERALL LENGTH | 4.700 INCHES |
| OVERALL WIDTH | 1.690 INCHES |
| OVERALL HEIGHT | 1.500 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.500 INCHES SINGLE END |
| MOUNTING METHOD | FACE |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE |
| MOUNTING FACILITY CIRCLE DIAMETER | 0.842 INCHES |
| INCLOSURE FEATURE | EXPLOSION PROOF |
| INCLOSURE SPECIFICATION | NEMA |
| CURRENT TYPE | DC INPUT |
| CURRENT RATING IN AMPS | 2.300 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 27.0 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 5.0 INCH-POUNDS RUNNING |
| WINDING TYPE | PERMANENT MAGNET |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 3.0 MINUTES MAXIMUM ON AND |
| 7.0 MINUTES MINIMUM OFF |
| TEMP RATING | -65.0 OPERATING DEG CELSIUS AND |
| 200.0 OPERATING DEG CELSIUS |
| COOLING METHOD | NONVENTILATED |
| TERMINAL TYPE AND QUANTITY | 2 SCREW |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 26.200 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET BELOW PARALLEL TO SHAFT AXIS SINGLE END |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.249 INCHES MINIMUM AND |
| 0.250 INCHES MAXIMUM SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |