| OVERALL LENGTH | 4.630 INCHES |
| OVERALL WIDTH | 1.911 INCHES |
| OVERALL HEIGHT | 1.911 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.500 INCHES SINGLE END |
| MOUNTING METHOD | FACE |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING FACILITY CIRCLE DIAMETER | 1.531 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| CURRENT TYPE | DC INPUT |
| CURRENT RATING IN AMPS | 1.200 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 24.0 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 1.3 FOOT-POUNDS RUNNING AND |
| 9.4 FOOT-POUNDS STALLED AND |
| 7.6 FOOT-POUNDS STARTING |
| WINDING TYPE | PERMANENT MAGNET |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 0.3 MINUTES MAXIMUM ON AND |
| 1.7 MINUTES MINIMUM OFF |
| TEMP RATING | -40.0 OPERATING DEG CELSIUS AND |
| 40.0 OPERATING DEG CELSIUS |
| COOLING METHOD | AIR TO AIR COOLED |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| SPEED CONTROL METHOD AND DEVICE TYPE | ELECTRICAL MECHANICAL |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 35.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE SINGLE END |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.3131 INCHES NOMINAL SINGLE END |
| FLATTED PORTION LENGTH | 0.4700 INCHES NOMINAL SINGLE END |
| FLAT DEPTH | 0.0501 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| THERMAL PROTECTIVE DEVICE |