| SHAFT DIAMETER | 0.2500 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | THERMAL PROTECTIVE DEVICE AND |
| ELECTRIC NOISE SUPPRESSOR AND |
| HORIZONTAL MOUNTING POSITION AND |
| VERTICAL MOUNTING POSITION |
| SPECIAL FEATURES | FURNISHED WITH GEAR CLUSTER |
| OVERALL LENGTH | 3.309 INCHES |
| OVERALL WIDTH | 2.125 INCHES |
| OVERALL HEIGHT | 2.125 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.516 INCHES SINGLE END |
| MOUNTING METHOD | FLANGE |
| MOUNTING FACILITY TYPE AND QUANTITY | 3 SLOT |
| MOUNTING FACILITY CIRCLE DIAMETER | 1.905 INCHES |
| INCLOSURE FEATURE | EXPLOSION PROOF |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | DC INPUT |
| CURRENT RATING IN AMPS | 3.300 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 26.5 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 1.04 FOOT-POUNDS RUNNING AND |
| 2.86 FOOT-POUNDS STARTING |
| WINDING TYPE | PERMANENT MAGNET |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 20.0 SECONDS MAXIMUM ON AND |
| 20.0 SECONDS MINIMUM OFF |
| TEMP RATING | 20.0 OPERATING DEG CELSIUS AND |
| 30.0 OPERATING DEG CELSIUS |
| COOLING METHOD | AMBIENT AIR |
| TERMINAL TYPE AND QUANTITY | 4 SOLDER LUG |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 43.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE SINGLE END |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |