| OVERALL LENGTH | 3.078 INCHES |
| OVERALL WIDTH | 2.968 INCHES |
| OVERALL HEIGHT | 2.968 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.375 INCHES SINGLE END |
| MOUNTING METHOD | PAD |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.750 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.750 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | AC INPUT |
| CURRENT RATING IN AMPS | 30.000 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | SINGLE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 0.3333 HORSEPOWER OUTPUT |
| WINDING TYPE | INDUCTION-SHADED POLE |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 6.0 MINUTES MAXIMUM ON |
| COOLING METHOD | AMBIENT AIR |
| TERMINAL TYPE AND QUANTITY | 3 SOLDER LUG |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 1.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.1250 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |