| OVERALL LENGTH | 4.399 INCHES |
| OVERALL WIDTH | 2.750 INCHES |
| OVERALL HEIGHT | 3.875 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 1.250 INCHES SINGLE END |
| MOUNTING METHOD | PAD |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.625 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.564 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | AC INPUT |
| CURRENT RATING IN AMPS | 0.900 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| FREQUENCY IN HERTZ | 50.0 OR |
| 60.0 INPUT |
| PHASE | SINGLE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 11.5 INCH-POUNDS RUNNING AND |
| 17.0 INCH-POUNDS STALLED |
| WINDING TYPE | INDUCTION-SHADED POLE |
| DUTY CYCLE | CONTINUOUS |
| COOLING METHOD | NONVENTILATED |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 20.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| SHAFT END CHARACTERISTIC | A13 FIRST STYLE AND |
| A28 SECOND STYLE SINGLE END |
| HOLE DIAMETER | 0.096 INCHES MINIMUM AND |
| 0.097 INCHES MAXIMUM SINGLE END |
| SHAFT DIAMETER | 0.308 INCHES MINIMUM AND |
| 0.311 INCHES MAXIMUM SINGLE END |
| UNDERCUT DIAMETER | 0.275 INCHES MINIMUM AND |
| 0.278 INCHES MAXIMUM SINGLE END |
| UNDERCUT LENGTH | 0.029 INCHES MINIMUM AND |
| 0.032 INCHES MAXIMUM SINGLE END |
| HOLE CENTER TO SHAFT END DISTANCE | 0.9300 INCHES NOMINAL SINGLE END |
| UNDERCUT CENTER TO SHAFT END DISTANCE | 0.110 INCHES NOMINAL SINGLE END |
| HOLE DEPTH | 0.3090 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |