| OVERALL LENGTH | 1.781 INCHES |
| OVERALL WIDTH | 1.001 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.344 INCHES SINGLE END |
| MOUNTING METHOD | CLAMP RING |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| CURRENT TYPE | AC INPUT |
| CURRENT RATING IN AMPS | 0.750 SINGLE OUTPUT |
| CURRENT RATING METHOD | NO LOAD |
| FREQUENCY IN HERTZ | 1200.0 INPUT |
| PHASE | TWO INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 9.0 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 6.0 INCH-OUNCES STALLED |
| WINDING TYPE | SERIES WOUND |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | -40.0 AMBIENT DEG FAHRENHEIT AND |
| 212.0 AMBIENT DEG FAHRENHEIT |
| COOLING METHOD | NATURAL CONVECTION VENTILATED |
| TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 210.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.156 INCHES NOMINAL SINGLE END |
| FLATTED PORTION LENGTH | 0.3125 INCHES NOMINAL SINGLE END |
| FLAT DEPTH | 0.111 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |
| SPECIAL FEATURES | BODY FINE DIAMOND KNURL 33 PITCH |
| TEST DATA DOCUMENT | 05030-S315MR026P001 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 05030 |
| DESIGN CONTROL REFERENCE | 315MR026P001 |