| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | GENERAL PURPOSE |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | AMBIENT AIR |
| CURRENT TYPE | DC INPUT |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 29.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | ANGLED TO ARMATURE/ROTOR AXIS SECOND END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE FIRST END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| FLATTED PORTION LENGTH | 0.810 INCHES NOMINAL IDENTICAL ENDS |
| FLAT DEPTH | 0.020 INCHES NOMINAL IDENTICAL ENDS |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| LENGTH OF SHAFT FROM HOUSING | 0.940 INCHES FIRST END |
| LENGTH OF SHAFT FROM HOUSING | 0.940 INCHES SECOND END |
| OVERALL HEIGHT | 3.680 INCHES |
| OVERALL LENGTH | 7.160 INCHES |
| OVERALL WIDTH | 3.590 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.240 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 2.940 INCHES |
| POWER RATING | 0.0142 HORSEPOWER OUTPUT |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 2.000 INCHES IDENTICAL ENDS |
| SHAFT END CHARACTERISTIC | A5 SINGLE STYLE IDENTICAL ENDS |
| SHAFT DIAMETER | 0.3122 INCHES NOMINAL IDENTICAL ENDS |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE IDENTICAL ENDS |
| SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| WINDING TYPE | SHUNT WOUND |
| TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |