| OVERALL LENGTH | 7.093 INCHES |
| OVERALL WIDTH | 3.328 INCHES |
| OVERALL HEIGHT | 3.328 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.939 INCHES FIRST END |
| 0.968 INCHES SECOND END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 0.062 INCHES IDENTICAL ENDS |
| MOUNTING METHOD | FACE |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.250 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.625 INCHES |
| INCLOSURE FEATURE | INDUSTRIAL |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | AC INPUT |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | SINGLE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 0.0066 HORSEPOWER OUTPUT |
| WINDING TYPE | INDUCTION-SPLIT PHASE |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | -17.5 OPERATING DEG CELSIUS AND |
| 48.9 OPERATING DEG CELSIUS |
| COOLING METHOD | SELF-VENTILATED |
| TERMINAL TYPE AND QUANTITY | 1 PLUG |
| SHAFT ROTATION DIRECTION | CLOCKWISE IDENTICAL ENDS |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 9.770 SINGLE REVOLUTIONS PER MINUTE IDENTICAL ENDS |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | ANGLED TO ARMATURE/ROTOR AXIS IDENTICAL ENDS |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES IDENTICAL ENDS |
| SHAFT END CHARACTERISTIC | A5 SINGLE STYLE IDENTICAL ENDS |
| SHAFT DIAMETER | 0.3120 INCHES NOMINAL IDENTICAL ENDS |
| FLATTED PORTION LENGTH | 0.810 INCHES NOMINAL IDENTICAL ENDS |
| FLAT DEPTH | 0.020 INCHES NOMINAL IDENTICAL ENDS |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |
| SPECIAL FEATURES | EXCEPT AS MODIFIED BY STYLE,GEARED HEAD OUTPUT SHAFT IS VERTICAL TO MTG BASE |