| OVERALL LENGTH | 6.510 INCHES |
| OVERALL WIDTH | 5.410 INCHES |
| OVERALL HEIGHT | 7.000 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.940 INCHES SINGLE END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 3.840 INCHES SINGLE END |
| MOUNTING FACILITY TYPE AND QUANTITY | 3 UNTHREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.250 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 4.750 INCHES |
| INCLOSURE FEATURE | OPEN PROTECTED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | AC INPUT |
| CURRENT RATING IN AMPS | 0.400 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | SINGLE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 28.0000 WATTS OUTPUT |
| TORQUE RATING AND TYPE | 220.0 INCH-POUNDS STALLED |
| WINDING TYPE | INDUCTION-SHADED POLE |
| DUTY CYCLE | CONTINUOUS |
| COOLING METHOD | AMBIENT AIR |
| TERMINAL TYPE AND QUANTITY | 9 SCREW |
| SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| SHAFT END CHARACTERISTIC | A14 SINGLE STYLE SINGLE END |
| SPLINE MINOR DIAMETER | 0.4850 INCHES NOMINAL SINGLE END |
| SHAFT DIAMETER | 0.5000 INCHES NOMINAL SINGLE END |
| SPLINE LENGTH | 0.940 INCHES NOMINAL SINGLE END |
| SPLINE QUANTITY | 17 SINGLE END |
| FEATURES PROVIDED | DAMPER AND |
| HORIZONTAL MOUNTING POSITION |