| OVERALL LENGTH | 3.937 INCHES |
| OVERALL WIDTH | 1.125 INCHES |
| OVERALL HEIGHT | 1.125 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.375 INCHES SINGLE END |
| MOUNTING METHOD | FLANGE |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING FACILITY CIRCLE DIAMETER | 0.874 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | DC INPUT |
| CURRENT RATING IN AMPS | 0.300 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 26.5 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 30.0 INCH-OUNCES RUNNING AND |
| 100.0 INCH-OUNCES STALLED |
| WINDING TYPE | PERMANENT MAGNET |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 7.0 SECONDS MAXIMUM ON AND |
| 30.0 SECONDS MINIMUM OFF |
| TEMP RATING | -54.0 OPERATING DEG CELSIUS AND |
| 38.0 OPERATING DEG CELSIUS |
| COOLING METHOD | NONVENTILATED |
| MAXIMUM OPERATING ALTITUDE RATING | 60000.0 FEET |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 15.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE SINGLE END |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.1870 INCHES NOMINAL SINGLE END |
| FLATTED PORTION LENGTH | 0.3755 INCHES NOMINAL SINGLE END |
| FLAT DEPTH | 0.0105 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |
| SPECIAL FEATURES | SHAFT END STYLE A5 EXCEPT ADDITIONAL FLAT LOCATED AT 90 DEGREES |