| OVERALL LENGTH | 3.147 INCHES |
| OVERALL WIDTH | 1.375 INCHES |
| OVERALL HEIGHT | 1.375 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.587 INCHES SINGLE END |
| MOUNTING METHOD | FLANGE |
| MOUNTING FACILITY TYPE AND QUANTITY | 3 UNTHREADED HOLE |
| INCLOSURE FEATURE | GENERAL PURPOSE |
| INCLOSURE SPECIFICATION | NEMA |
| CURRENT TYPE | DC INPUT |
| CURRENT RATING IN AMPS | 0.200 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 27.5 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 3.7 INCH-POUNDS RUNNING AND |
| 7.5 INCH-POUNDS STALLED AND |
| 7.5 INCH-POUNDS STARTING |
| WINDING TYPE | PERMANENT MAGNET |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 0.1 MINUTES MAXIMUM ON AND |
| 0.4 MINUTES MINIMUM OFF |
| TEMP RATING | 85.0 AMBIENT DEG CELSIUS |
| COOLING METHOD | AIR TO AIR COOLED |
| MAXIMUM OPERATING ALTITUDE RATING | 50000.0 FEET |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 94.500 LOW REVOLUTIONS PER MINUTE AND |
| 114.000 HIGH REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ROTOR AXIS SINGLE END |
| SHAFT END CHARACTERISTIC | A23 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.1820 INCHES NOMINAL SINGLE END |
| TEETH QUANTITY | 26 SINGLE END |
| FEATURES PROVIDED | FRAME ELECTRICALLY GROUNDED AND |
| VERTICAL MOUNTING POSITION |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 13499 |
| DESIGN CONTROL REFERENCE | 761-7416-001 |