| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | NONVENTILATED |
| CURRENT RATING METHOD | LOAD |
| CURRENT RATING IN AMPS | 1.050 SINGLE OUTPUT |
| CURRENT TYPE | AC INPUT |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 81.900 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| FREQUENCY IN HERTZ | 400.0 INPUT |
| FULL TOOTH LENGTH | 0.313 INCHES NOMINAL SINGLE END |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| LENGTH OF SHAFT FROM HOUSING | 0.313 INCHES SINGLE END |
| OVERALL HEIGHT | 1.062 INCHES |
| OVERALL LENGTH | 2.844 INCHES |
| OVERALL WIDTH | 1.062 INCHES |
| MAXIMUM OPERATING ALTITUDE RATING | 10000.0 FEET |
| MOUNTING FACILITY CIRCLE DIAMETER | 0.812 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING METHOD | FACE |
| PHASE | SINGLE INPUT |
| SHAFT END CHARACTERISTIC | A17 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.1240 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM SINGLE END |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| WINDING TYPE | SYNCHRONOUS |
| TEETH QUANTITY | 10 SINGLE END |
| TEMP RATING | -55.0 OPERATING CELSIUS AND 85.0 OPERATING CELSIUS |
| TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| TORQUE RATING AND TYPE | 15.11 INCH-OUNCES RUNNING |