| OVERALL LENGTH | 3.560 INCHES |
| OVERALL WIDTH | 1.375 INCHES |
| OVERALL HEIGHT | 1.375 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.500 INCHES SINGLE END |
| MOUNTING METHOD | FLANGE |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING FACILITY CIRCLE DIAMETER | 0.812 INCHES |
| INCLOSURE FEATURE | OPEN PROTECTED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | DC INPUT |
| CURRENT RATING IN AMPS | 0.240 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 27.0 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 2.0 INCH-OUNCES STALLED |
| WINDING TYPE | PERMANENT MAGNET |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | -55.0 OPERATING DEG CELSIUS AND |
| 85.0 OPERATING DEG CELSIUS |
| COOLING METHOD | AMBIENT AIR |
| TERMINAL TYPE AND QUANTITY | 2 SCREW |
| SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 2.800 LOW REVOLUTIONS PER MINUTE AND |
| 3.500 HIGH REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE SINGLE END |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.1875 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 25140 |
| DESIGN CONTROL REFERENCE | 43A113-1 |