| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | NONVENTILATED |
| CURRENT TYPE | AC INPUT |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 10.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| FLATTED PORTION LENGTH | 0.6250 INCHES NOMINAL SINGLE END |
| FLAT DEPTH | 0.020 INCHES NOMINAL SINGLE END |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| LENGTH OF SHAFT FROM HOUSING | 0.750 INCHES SINGLE END |
| OVERALL HEIGHT | 2.375 INCHES |
| OVERALL LENGTH | 3.531 INCHES |
| OVERALL WIDTH | 2.375 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.906 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.906 INCHES |
| PHASE | SINGLE INPUT |
| SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE SINGLE END |
| SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| WINDING TYPE | PERMANENT MAGNET |
| TEMP RATING | 40.0 AMBIENT CELSIUS |
| TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
| TORQUE RATING AND TYPE | 11.25 INCH-POUNDS RUNNING |