|
|
|
National Stock Number:
3010-01-486-6778
Federal Supply Class:
3010
National Item Identification Number:
014866778
Description:
UNIVERSAL JOINT,NONVEHICULAR
Detail:
A FLEXIBLE CONNECTION DESIGNED FOR NONVEHICULAR APPLICATIONS WHICH PERMITS ROTARY MOTION TO BE TRANSMITTED BETWEEN TWO SHAFTS LOCATED AT AN ANGLE TO EACH OTHER. THE ANGLE BETWEEN THE SHAFTS MAY BE CONTINUALLY VARIED WITHIN CERTAIN LIMITS; THE CONNECTING ENDS MUST HAVE EITHER A FLANGE, HUB, OR SPLINED STUB SHAFT; THE PLAIN PORTION OF A SPLINED STUB SHAFT MUST NOT EXCEED THE LENGTH OF THE SPLINES. EXCLUDES DRIVE OR PROPELLER SHAFTS WITH JOINT(S) AT ONE OR BOTH ENDS. SEE UNIVERSAL JOINT,GEARED.
|
Manufacturer Information:
| 342-7067322-136 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7067322 | 53711 | NAVAL SEA SYSTEMS COMMAND | | H643-7003 | 96169 | ELECTRIC BOAT CORPORATION | | H643-7003-136 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| CONNECTION END TYPE | HUB,STRAIGHT SPLINE FIRST END | | DESIGN TYPE | BLOCK AND PIN | | HUB SPLINE QUANTITY | 10 FIRST END | | INTERNAL HUB SPLINE MAJOR DIAMETER | 1.2490 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM FIRST END | | OVERALL LENGTH | 8.0000 INCHES NOMINAL | | SPECIAL FEATURES | FIRST END BORED 0.3120 INCH DIA. 0.6200 INCHES TO CENTER OF BORE FROM END. SECOND END SPLINE QTY IS 10 AND SPLINE MAJOR DIA. IS 0.9990 TO 1.0000 INCHES. SECOND END COUNTER BORED TWO TIMES 180 DEGREES APART 0.50000 INCH TO CENTER OF BORE FROM END 0.50000 INCH DEEP AND THREADED 0.250-20UNC-2B, 0.38 (MIN) FULL THD |
|
|