|
|
|
National Stock Number:
3010-01-486-6793
Federal Supply Class:
3010
National Item Identification Number:
014866793
Description:
UNIVERSAL JOINT,NONVEHICULAR
Detail:
A FLEXIBLE CONNECTION DESIGNED FOR NONVEHICULAR APPLICATIONS WHICH PERMITS ROTARY MOTION TO BE TRANSMITTED BETWEEN TWO SHAFTS LOCATED AT AN ANGLE TO EACH OTHER. THE ANGLE BETWEEN THE SHAFTS MAY BE CONTINUALLY VARIED WITHIN CERTAIN LIMITS; THE CONNECTING ENDS MUST HAVE EITHER A FLANGE, HUB, OR SPLINED STUB SHAFT; THE PLAIN PORTION OF A SPLINED STUB SHAFT MUST NOT EXCEED THE LENGTH OF THE SPLINES. EXCLUDES DRIVE OR PROPELLER SHAFTS WITH JOINT(S) AT ONE OR BOTH ENDS. SEE UNIVERSAL JOINT,GEARED.
|
Manufacturer Information:
| 342-7067322-10 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7067322 | 53711 | NAVAL SEA SYSTEMS COMMAND | | H643-7003 | 96169 | ELECTRIC BOAT CORPORATION | | H643-7003-10 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| CONNECTION END TYPE | HUB,BORED FIRST END | | CONNECTION END TYPE | HUB,STRAIGHT SPLINE SECOND END | | DESIGN TYPE | BLOCK AND PIN | | HUB BORE DIAMETER | 1.2520 INCHES MINIMUM AND 1.2540 INCHES MAXIMUM FIRST END | | HUB SPLINE QUANTITY | 10 FIRST END | | INTERNAL HUB SPLINE MAJOR DIAMETER | 0.9990 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM FIRST END | | OVERALL LENGTH | 7.1100 INCHES NOMINAL | | SPECIAL FEATURES | FIRST END DRILLED 2 PLACES THRU 0.4370 INCH DIA. ONE SIDE ONLY 0.6800 INCH TO CENTER OF BORE AND 1.6100 INCHES TO CENTER OF BORE 90 DEGREES APART |
|
|