| MATERIAL | STEEL COMP E9310 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6265 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | OXIDE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| TEETH QUANTITY | 35 |
| TOOTH FORM | STUB |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| PITCH DIAMETER | 1.7500 INCHES NOMINAL |
| NOMINAL OVERALL LENGTH | 2.144 INCHES |
| NOMINAL OUTSIDE DIAMETER | 1.848 INCHES |
| FACE NOMINAL WIDTH | 0.434 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.855 INCHES BOTH ENDS |
| BORE NOMINAL DIAMETER | 1.390 INCHES BOTH ENDS |
| SPLINE QUANTITY | 12 BOTH ENDS |
| SPLINE PITCH DIAMETER | 0.6000 INCHES NOMINAL BOTH ENDS |
| COUNTERBORE NOMINAL DIAMETER | 0.625 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | 2 STEPS BOTH ENDS |
| END NOMINAL LENGTH | 0.368 INCHES FIRST END |
| 0.368 INCHES SECOND END |
| END NOMINAL DIAMETER | 0.875 INCHES FIRST END |
| 0.875 INCHES SECOND END |
| FIRST STEP NOMINAL LENGTH | 0.365 INCHES FIRST END |
| 0.365 INCHES SECOND END |
| FIRST STEP NOMINAL DIAMETER | 0.984 INCHES FIRST END |
| 0.984 INCHES SECOND END |
| SECOND STEP NOMINAL LENGTH | 0.122 INCHES FIRST END |
| 0.122 INCHES SECOND END |
| SECOND STEP NOMINAL DIAMETER | 1.060 INCHES FIRST END |
| 1.060 INCHES SECOND END |
| BODY STYLE | PLAIN, SOLID |
| SPECIAL FEATURES | SPLINE MINOR NOM DIAMETER 0.550 IN. |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 55820 |
| DESIGN CONTROL REFERENCE | 31123-1 |