| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.187 INCHES BOTH ENDS |
| FACE NOMINAL WIDTH | 0.094 INCHES |
| HUB NOMINAL DIAMETER | 0.370 INCHES FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| PITCH DIAMETER | 1.5625 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 40 TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.187 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 1.581 INCHES |
| NOMINAL OVERALL LENGTH | 0.276 INCHES |
| SPECIAL FEATURES | ALIGNMENT HOLE 0.1240 LOCATED ON FACE OF GEAR ON BOLT CIRCLE OF 0.5000 |
| PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| SURFACE TREATMENT | ANODIZE OVERALL |
| TEETH QUANTITY | 150 |
| TOOTH FORM | STANDARD |