| MATERIAL | ALUMINUM ALLOY 6061 BODY |
| STEEL COMP 304 HUB |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| 66 FED STD SINGLE MATERIAL RESPONSE AND |
| AISI 304/SAE30304 ASSN STD SINGLE MATERIAL RESPONSE HUB |
| SURFACE TREATMENT | ANODIZE BODY |
| PASSIVATE HUB |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE BODY |
| TEETH QUANTITY | 100 |
| TOOTH FORM | STANDARD |
| PRESSURE ANGLE | 20.0000 DEGREES |
| PRECISION CLASSIFICATION | QUALITY NUMBER 13 OR |
| QUALITY NUMBER 14 |
| STYLE DESIGNATOR | PROTRUDING HUB |
| PITCH DIAMETER | 1.3889 INCHES NOMINAL |
| NOMINAL OUTSIDE DIAMETER | 1.417 INCHES |
| FACE NOMINAL WIDTH | 0.126 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.250 INCHES FIRST END |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.187 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| END NOMINAL LENGTH | 0.062 INCHES FIRST END |
| END NOMINAL DIAMETER | 0.250 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.188 INCHES FIRST END |
| FIRST STEP NOMINAL DIAMETER | 0.437 INCHES FIRST END |
| BODY STYLE | PLAIN, WITH LIGHTENING HOLES |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 2 PLAIN AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE NOMINAL DIAMETER | 0.093 INCHES AXIALLY THROUGH BODY, FIRST END |
| BOLT HOLE CIRCLE NOMINAL DIAMETER | 0.355 INCHES AXIALLY THROUGH BODY, FIRST END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 10001 |
| DESIGN CONTROL REFERENCE | 1266703 |