| MATERIAL | STEEL COMP 303 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 63 |
| TOOTH FORM | STANDARD |
| PRESSURE ANGLE | 20.0000 DEGREES |
| PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| STYLE DESIGNATOR | PROTRUDING HUB |
| PITCH DIAMETER | 0.5240 INCHES MINIMUM AND |
| 0.5250 INCHES MAXIMUM |
| NOMINAL OUTSIDE DIAMETER | 0.541 INCHES |
| FACE NOMINAL WIDTH | 0.060 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.160 INCHES FIRST END |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.094 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| END NOMINAL LENGTH | 0.015 INCHES FIRST END |
| END NOMINAL DIAMETER | 0.125 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.1450 INCHES FIRST END |
| FIRST STEP NOMINAL DIAMETER | 0.312 INCHES FIRST END |
| BODY STYLE | PLAIN, SOLID |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.0860 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 56 TRANSVERSELY THROUGH HUB, FIRST END |
| SPECIAL FEATURES | MTG HOLES 120 DEG APART |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 10138 |
| DESIGN CONTROL REFERENCE | 103348 |