|
|
|
National Stock Number:
3020-00-200-2107
Federal Supply Class:
3020
National Item Identification Number:
002002107
Description:
GEAR,HELICAL
Detail:
A GEAR, CYLINDRICAL IN FORM, WITH TEETH ON THE OUTER SURFACE AT AN ANGLE TO THE AXIS OF THE GEAR. SEE ALSO GEAR, ANTIBACKLASH, HELICAL:
|
Manufacturer Information:
| 1006886M1 | 14398 | MASSEY-FERGUSON INC GEAR AND SHAFT PLANT DIV | | 10M075 | 07426 | WARWICK ELECTRONICS INC PACIFIC MERCURY DIV | | F400H00401 | 14351 | TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC | | F400H401 | 14351 | TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC | | TG2645 | 31033 | TRW INC TRW INTL TRADE GOVERNMENT SALES DEPT | | 50186 | 96046 | CRANE PUMPS & SYSTEMS PFT CORP |
|
Techincal Specification:
| BODY STYLE | SPOKED | | BORE NOMINAL DIAMETER | 1.0003 INCHES FIRST END | | BORE STYLE | W/ KEYWAY BOTH ENDS | | END NOMINAL DIAMETER | 1.875 INCHES FIRST END | | END NOMINAL LENGTH | 0.2812 INCHES FIRST END | | FACE NOMINAL WIDTH | 1.063 INCHES | | FIRST STEP NOMINAL DIAMETER | 0.0625 INCHES FIRST END | | FIRST STEP NOMINAL LENGTH | 0.2812 INCHES FIRST END | | HELIX ANGLE | 37.1734 DEGREES | | HUB NOMINAL DIAMETER | 1.875 INCHES SECOND END | | HUB STYLE DESIGNATOR | 1 STEP FIRST END | | KEYWAY NOMINAL WIDTH | 0.1584 INCHES FIRST END | | MATERIAL | IRON OVERALL | | PITCH DIAMETER | 6.0240 INCHES NOMINAL | | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.5953 INCHES FIRST END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.156 INCHES FIRST END | | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.313 INCHES SECOND END | | NOMINAL OUTSIDE DIAMETER | 6.216 INCHES | | PRESSURE ANGLE | 14.5000 DEGREES | | STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE RECESSED HUB | | TEETH QUANTITY | 48 | | TEETH TYPE | SINGLE HELIX | | SPECIAL FEATURES | TIMING MARK ON 1ST SIDE 170 DEG 26 MIN 51 SEC CCW FROM KEYWAY,TIMING MARK ON 2ND SIDE 116 DEG 34 MIN CCW FROM TIMING MARK ON 1ST SIDE,2 HOLES 5/32 IN. DIA,ONE LOCATED OVER KEYWAY,180 DEG APART | | TOOTH DIRECTION | RIGHT | | TOOTH FORM | STANDARD |
|
|