| STYLE DESIGNATOR | FIXED TORQUE, SPRING WASHER LOADED |
| SURFACE TREATMENT | PASSIVATE BODY |
| SURFACE TREATMENT | PASSIVATE CLAMP |
| SURFACE TREATMENT | PASSIVATE HUB |
| TEETH QUANTITY | 192 |
| TOOTH FORM | STANDARD |
| TORQUE CAPACITY | 10.00 INCH-OUNCES MAXIMUM |
| ATTACHMENT METHOD | MOUNTING HOLE |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.187 INCHES BOTH ENDS |
| FACE NOMINAL WIDTH | 0.125 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.263 INCHES FIRST END |
| NOMINAL DISTANCE BETWEEN FACE EDGE AND BODY END | 0.415 INCHES |
| NOMINAL OUTSIDE DIAMETER | 2.6944 INCHES |
| NOMINAL OVERALL LENGTH | 0.803 INCHES |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| PITCH DIAMETER | 2.6666 INCHES NOMINAL |
| PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| PRESSURE ANGLE | 20.0000 DEGREES |
| SPECIAL FEATURES | CLUTCH SPRING MUST BE ALTERED |