|
|
|
National Stock Number:
3020-00-237-3467
Federal Supply Class:
3020
National Item Identification Number:
002373467
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| 10236901-2 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | ABC27-90P1 | 23266 | SECS, INC. | | Z5E-90 | 00328 | DESIGNATRONICS INCORPORATED |
|
Techincal Specification:
| ATTACHMENT METHOD | CLAMP | | BORE NOMINAL DIAMETER | 0.187 INCHES BOTH ENDS | | BORE STYLE | PLAIN BOTH ENDS | | CLAMPING SURFACE NOMINAL LENGTH | 0.305 INCHES FIRST END | | FACE NOMINAL WIDTH | 0.104 INCHES | | HUB STYLE DESIGNATOR | SPLIT FIRST END | | HUB NOMINAL DIAMETER | 0.250 INCHES FIRST END | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.221 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 1.437 INCHES | | PITCH DIAMETER | 1.4053 INCHES MINIMUM AND 1.4063 INCHES MAXIMUM | | PRECISION CLASSIFICATION | QUALITY NUMBER 10 | | PRESSURE ANGLE | 20.0000 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUB | | SURFACE TREATMENT | PASSIVATE OVERALL | | TEETH QUANTITY | 90 | | TOOTH FORM | STANDARD |
|
|