| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.065 INCHES |
| HUB NOMINAL DIAMETER | 0.218 INCHES SECOND END |
| HUB STYLE DESIGNATOR | PLAIN SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 303 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| PITCH DIAMETER | 0.3333 INCHES NOMINAL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.060 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 80 TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.083 INCHES SECOND END |
| NOMINAL OUTSIDE DIAMETER | 0.3611 INCHES |
| NOMINAL OVERALL LENGTH | 0.160 INCHES |
| PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| PRESSURE ANGLE | 20.0000 DEGREES AND 45.0000 DEGREES |
| STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 24 |
| TEETH TYPE | STRAIGHT |